Monday, 26 May 2014

Evaluation of Final Major Project

The final outcome of my project is a brand identity for a punk influenced record label and music packaging for a compilation album which would be released through the label. I also created tote bags as an outcome for the label. It differs from my project proposal as I am not branding an artist I am branding a record label. You can design for a record label without hearing the music but for an artist they need to have an idea of what genre or what they sound like so you can design for them with their music in mind. Designing for a record label is slightly easier than designing and branding people because people have personalities which can change.  Initially I wanted to develop my digital designing skills but realised that 7 weeks was too short of a time to improve this as this project was less about learning but reflecting, doing proper research and developing to get the best possible result.

The methods I used to show my learning have effected the project are probably reflection on my blog and my sketchbooks. I feel like I did an adequate amount of work for every task I set for myself. I think the best decision I made this project was to split up my ideas into different sketchbooks as this way I could focus on one design topic at a time. I could also separate appropriate research for each design which helped me concentrate and was a good motivation. My blog at the beginning of the project was evaluative. Towards week 4 it became more of a pain to update as I was doing so much work and I liked to write about my work. Leaving it til the last moment was not a good idea but that way I was able to finish my work. I still did evaluation even though I was behind and this gave me the chance to see things differently and try to expand an idea e.g. if I was doing a manifesto what type would I use? What would my background be?

Targets:
  • to create a new identity for a currently existing or fictional artist - I did not meet this target as I changed the project idea to creating a record label. I did create a new identity for my own record label and I think that it is a better idea than my previous one. It gave me the space to create anything I wanted to from stickers to a manifesto and it was as broad as I wanted it to be.
  • using their identity produce applications such as album packaging in the physical music formats of CD and vinyl - I created a vinyl packaging because I thought that was more appropriate for my target demographic. 
  • To design and produce ways to advertise said artist and artist merchandise - I did not do this due to time restraints.
One thing that contributed towards the project was my use of experimentation as it made me think about how I design and this is something I'm going to take out of this project as I think that experimentation is so crucial to every designer's process otherwise you could miss the idea that fits on paper but maybe not so much as an idea in your head. 

In my crit session, I was also advised during week 6 that my main logo should be the simple type response instead of the logo which I had at the top of the manifesto. I was told it was because the window logo was too complex and had too much information and would not translate well small. Because it had taken me quite a long time to come up with the logo and I was proud of it I did not want to discard the idea. So I thought of it as the crest for the record label and the other typographic logo could be the logo used on for example festival graphics.

 I asked one of my peers for her advice on colours at the end of the project for certain panels of the album artwork and she suggested that some of the colours clashed on the 2nd panel of the album cover posters and so I changed that. I looked for contrasting colours and worked with it trying to get them to work against each other as the original colours were too similar.

In the first week I changed FMP idea as the original idea wasn't clear enough and would have been harder to do as people would have compared it to the original brands I got my ideas from. I feel it was successful as I created outcomes of various medias using quite a lot of experimentation. I did not do things I was not happy with or what I did not want to do. On the other hand I found it hard to distribute time for tasks at certain points in the project. I found that it was easy to use up energy during some weeks and other weeks I found it hard to do work because of that. At some points I felt behind because I didn't have enough outcomes. I feel like did enough experimentation with colour which was my weakness at the beginning of the project by trying things out digitally as this was faster than by hand. Sometimes, my experimentation I found was better than my original idea and I am really happy with that. I tried to work to my strengths otherwise I think that the project would not have gone as well but I still felt out of my comfort zone during some parts such as the music packaging as I was creating something physical and certain things had to be exact such as measurements and materials used to create it. To improve the outcome I felt that I could have done a few poster designs as I feel like it still lacks advertisement which is what I set out to do, had a more clear plan for the new FMP idea as there was a few points in the project where I didn't have a clear goal or outcome for the week and I feel that is where I wasted useful time.

The next project I do or take on I need to do research. I had never done as much research as I did during this project and I learnt that you are constantly learning and gaining influences throughout project. I learned that I have a strong work ethic which is when I like something and I believe in it, I feel motivated and taking on projects that I know I will be engaged with. Time is a really important thing to consider and it goes well with planning and I feel like during this project I let the work load and my expectations rise above me and it was very difficult to fulfil everything I wanted to do.  If I had more time during this project I think I would have redone some of the art for the vinyl cover and done another application such as a t-shirt. Another thing I learnt from this project is to trust your own instinct with what looks good as sometimes there is no one around to critique and to always push the idea.  I developed the need to develop and experiment with colour and that's something I need to take which I used a little during this project but I need to expand on it some more. I think I'm still hesitant with colour as I don't know how to really use it properly and what works well together. I also learned that you need to learn from your peers as your designing view could be jaded whereas they give an unbiased and honest opinion. I am doing Graphic and Media Design at London College of Communication so there I think I want to expand on my use of photography and print making which I think I am already improving on even through the projects I've done at Ravensbourne.

Friday, 23 May 2014

Week 7 of Final Major Project

During week 7 of the final major project I fully engaged with illustration task I set for myself. I wanted to create the 4 panel artwork which was going to sit in the cardboard box and a square was going to be cut so that you could see one at a time.

One of the problems I had was finding the right drawing style to approach this design. I already had the pink on acetate so I knew I wanted a more humorous drawing style and for it not to be so serious. I wanted it to be modern but still punk so I explored a more simpler way of drawing people. I tried to be loose with the pen or have very straight lines. This process was completely out of trial and error and finding bits of faces that I liked and adding them to create a ideal style for me. I eventually settled on a style which was of round eyes and easily drawn hair (that consisted of shapes). The style was quite soft which is good because it lifts the tone of the art.

couldn't draw boys
what to draw










Another problem encountered was that I struggled to draw male faces. I couldn't grasp how to give them typically masculine features so I tried to observe fellow male classmates in order to try to get a better idea of it. I think that the reason I could draw female faces is because I have had past experience with doing so so it's a familiar task whereas men are quite difficult to draw in my opinion.

Here I just drew up some ideas for clothing the people that were going to be in the album artwork.
One of the first ideas was that there would be an overflowing bathroom and people would be dancing in the water. This was a very hard problem to solve and I ended up drawing another panel instead of this. I found it really hard to draw a bath overflowing, I wanted to make the dancing look natural but I didn't think I could so I struggled for a day trying to work out how I could convey this idea. I thought that dancing wasn't really a thing that punk kids did so I decided to look at skateboarding  in the water and as reference looked at Southbank Skate area.

Here I did a brainstorm of the living room panel and tried to work out what I wanted. One of the ideas involved two people jumping but I found it boring and too complex to draw. I also found out that the idea I wanted I didn't really like so I decided to put one person on the sofa and add lyrics next to them in the style of a lyric booklet.



For all of the designs I used layout paper to work out where and what I wanted exactly in the photo without drawing right onto the paper and having to draw the design out again. I found this particularly handy as there were parts such as faces and this helped me work out some ideas such as the 3rd which ended up feeling like a Boneface homage as the lyrics are handwritten next to the girl on the sofa similar to his Queens of the Stone Age work.





Below is the final result of the artwork. I put those 4 pieces together and they would alternately be artwork. They also could work as the album booklet. Another design feature I would have added is the ability to rip the art apart and use them separately. I on the other hand don't feel that that would have worked but that is a good idea nonetheless. I feel like one and three are statement pieces more than the others. I think this because they could stand strongly on their own without the others.  I'm proud of those two the most but also proud of the second piece because when it scanned it did not look the best and my marker was running out so that affected the quality of the line.


Colour wise I think I took inspiration from John Yates and Wolf Mask and chose to work with contrasting colours and black because they made an interesting mix and pull the attention of the viewer. Also the hand made type makes both of those artists interesting as it adds that punk feel to the artwork which is what I was going for when I created my own.



my own:



The physical packaging was by far the most difficult thing I created during the project because I had to be very specific and precise with cutting the cardboard which became the box and the acetate which was the sleeve inside. The first acetate sleeve was too big for the actual box and for it to fit into as it was taller than the actual box. I made this mistake probably because I was in a rush and redid it to be 12 inches tall which then it fit into it. I felt like this was a set back as the time spent doing this could have been used to do something else. 

Another problem I had with packaging was that it would not fasten with double sided sticky tape which frustrated me til I used a hot glue gun instead. I found this even to be difficult to use as I had to glue both sides carefully and by the time I had done this the glue would be dry. So I had to do this a few times and it finally stuck but I felt that it looked messy but the mess did not detract from the purpose of the box.



Monday, 12 May 2014

Week 6 of Final Major Project

During week 6 of the final major project, I found out that it was very difficult to have time management skills if you did not allot your time to something before as I had not planned so my original plan was to design stickers which could be put into the final show and to be available for people to take with them. I slowly lost the motivation to do that so I began to focus on the music packaging part of the project which is what I originally wanted to do.

I was curious to what the surface of acetate could hold on it. I had see people print their work onto the acetate but never paint onto it so I wanted to try it for myself. I spray painted onto the matte side of it and waited. The paint dried but slightly cracked. I was okay with this result and kept this surface in mind. Because I was planning to create such a complex package with the fold out poster and cardboard box holding it all, I wanted to use a surface that was simple and could still be aesthetically pleasing.


Taking inspiration from Kate Moross and her prints, I knew I wanted to create something for the vinyl to sit in that was interesting and had a pattern that was simple. I generated ideas related to the phrase "Homewreckers" which is what I wanted to compilation album that HHR was going to release and settled on the idea of a simple block print of a baseball bat with nails in it was appropriate. I thought that using a block print matched the ethics of the label as it was very easy to do yourself and the design itself was quite bold and strong in shape.




 I firstly printed the colour black which I thought was a strong colour but I felt that it was boring and I wanted a change from black and white as I had focused on it throughout the manifesto design part of the project and also the logo.

I then explored the way other colours looked but found that pink or yellow looked the best on white paper. I also needed to print cleanly on the paper otherwise the edges would print onto the page which is not what I wanted. I went for the alternating way of the pattern because I thought it looked better than just straight printing and it looked more interesting.








I printed the design onto black paper on which I found both pink and white to be appealing. I still did not want to use black or white paper as I didn't like the results and found both quite boring.

I chose again to print onto the acetate because I thought that because of the complex packaging it would be a simple black vinyl instead of a bold colour like many artists release today. A simple black vinyl would look nice under the pink printed acetate as there would be a contrast bold pink design and the harsh black. I feel like my design idea was quite unique unlike most of the music packaging I had looked at in the research stages of the project.


I had also explored various ways of packaging and what certain things would look like. I wondered whether I wanted the consumer to also be the interactee of the packaging. I found that this would be time consuming if done and stuck to my original plan of creating a 4 panel artwork in which is becomes interchangeable album artwork. I found that this could still be interactive.








In my crit session, I was also adviced this week that my main logo should be the simple type response instead of the logo which I had at the top of the manifesto. I was told it was because the window logo was too complex and had too much information and would not translate well small. Because it had taken me quite a long time to come up with the logo and I was proud of it I did not want to discard the idea. So I thought of it as the crest for the record label and the other typographic logo could be the logo used on for example festival graphics.

Monday, 5 May 2014

Week 5 of Final Major Project

During week 5 of the final major project, I decided to create a manifesto for the record label. I thought that this was important to create as I had to establish what my brand was about and what we stood for which was especially crucial if we were going to be punk influenced.

Firstly I continued from week 4 and scanned in my logo in and began to edit it to make it look less like it was on paper and more like a digital image. I brightened the image and make the lines more black using the paint bucket tool which gave it this bold and blocky style. I thought that this made it looks more like it was done with a marker pen than digitally. I was looking for that style and I thought that this was the closest that I was going to get it. I still felt like the blue was a powerful colour, if not too powerful and catches your attention rather than the boards getting the attention and reading the name of the label. The blue did not look like it was done using inks which I thought was great but I still found it better to do it on the paper than on the computer otherwise I think I would have struggled to find the blue I wanted and it would have been more trial and error than I wanted it to be.



An important decision to make this week was what font the manifesto should be in. I thought that this was important as what we chose had implications on how people saw my record label and what type of label we were. I had to also make sure this font that I chose was readable as I was going to use it in a manifesto which people read and it was an introduction to the label. I decided I wanted to put the label logo at the top of the page like a letterhead. I decided that this was the closest thing that the label would have to a letter head. I did not want to design anything I found too formal as it would not fit in with the label ideals.



I did not really like the fonts which I had chosen. Futura was suggested to me but I did not like this font because it was too narrow, the characters were also too round and I didn't like the tone it expressed. I also found it too plain and that it could be applied to anything. This is not what I wanted. I felt that having just that was a bit boring so I wanted a type that was able to make a statement and I found that Futura whether it was normal or thinner just did not fit the brand I wanted to create.





 This is the only font I really liked out of the original ones I had on the first sheet. I liked American Typewriter because it had that DIY feeling which I really liked and it was one of the unique points about our label. But I found the font too thin on the white background so I made its font bigger and changed how bold the letters were. I think that one of the problems with this is that it feels very empty still and that the logo was still too big.



 It was suggested to me to invert image on Photoshop by one of the tutors so as an experiment I did this. The result of the inversion is below. I liked this version as it we just plain black and white which made it more simple. I wanted to instantly tidy up where the blue once was and make the grey more black making it look slightly more cleaner. On the other hand I still liked the grit of the grey bleeding into the black.


One of the next changes I made to the logo was that I removed the square around EST which gave me more space in that area of the wooden board. I liked this because it did not feel so squashed when in black and white where as with white and black it felt quite spacious and craved colour to fill it. I tried to get rid of the grey with the paint bucket tool but found this difficult and meticulous unlike other tasks in project. This was because I had painted it so it seemed to be ingrained into the white lines so using the selector tool seemed impossible without grouping it together. I am really glad I did not chose to use computer software throughout the whole project as I found it stressful to use because I think I lacked patience and experience when using it.


 I then cleaned up the logo just as an experiment to see what it would look like without any of the lines. I wanted to simplify it. But again, this task was time consuming, making sure that Photoshop did not delete the important information such as the words inside of the boards whilst editing it. I found this design too clean for the label and also found it boring because it was missing something interesting and I found that the lines gave the design more energy.


I felt that the logo now felt very "punk" and reminiscent of past punk artists such as Arturo Vega's design of the Ramones logo. The Ramones logo has a set font where as mine does not and I think that it would be hard to recreate unless it was my hands doing so.

Because of the logo change I decided to change the feel of the manifesto. The colour black gives it less of a specious feeling than white so the white type on the black background looked better than vice versa. I made the logo smaller which looks better as it does not take over a third of the page. I really liked the "we are HHR" part of the manifesto as it really emphasises that fact as it is in bold. I think that the font suits the design better now.