Wednesday, 23 October 2013

3D Design Day 3

On the last day of 3DD, we were given the task to create paper bridges. We were also given about an hour to do so which I thought was quite difficult especially with no inspiration. It was harder to come up with ideas today than the day before as  they wanted more spontaneous ideas from us and we had to use our sketchbooks to make them. 
I decided to design quite simple structures. The first bridge in the picture I decided to make non symmetrical as I thought it would be interesting so one half has a longer roof than the other. Shapes like those were created due to a shorter time span given to us which I think is sometimes good as you are sometimes more creative when a deadline is near.


Here I decided to do a bridge less conventional with paths crossing and separating from each other but on the other side it was just one straight part. Again I thought of not being symmetrical with my bridges and trying to make them unique and I wanted to create something that would potentially be a unusual user experience.


For this bridge, I was inspired by a futuristic transportation system which relies on suction and air force to help the person get there they are going. This was probably the fastest bridge I made as I wanted to increase the amount of bridges I had in the short amount of time.


This bridge was designed more like a tower or building and I thought that it would be an interesting bridge to walk though as the holes cast shadows. This was probably my favourite to make as it was so simple and  relied on the paper chain method where every side is the same.



Our last task of the day was to create a bridge from cardboard, elastic bands, tape and bamboo sticks. We were given an hour and a half to do this task which was quite a short time but with 6 of us in a group everyone had their roles to do. This was a very difficult task to do as it relied on communication between all of us, because of the short time, because of the materials given to us to use and because we did not know what size the car that had to drive over it was.

 


We decide to use the bamboo sticks as the road for the car, giving it two main paths for each wheel to ride over. We made the paths about 4 sticks wide and taped them together. This was probably the easiest part of the whole making process.
In the original plans we were meant to have a cardboard spiral rotating around the bridge like a spring. We made this using cardboard which I scored and then we made holes and joined them together using rubber bands. We made modifications to this as it was not going around diagonally so we ended up cutting it again.


At this point in the making we were almost finished and we were using bamboo to support the main paths for the car on top. 
We also added cardboard to the end of the bamboo points in order for the car to come onto the bridge. This was not a part of our design originally but we realised that we need to add this like the other groups in our class.





We tried to test out the spiral roof of the bridge lastly and join it to the bamboo sticks using the elastic bands in the same way we joined the pieces of cardboard. This was difficult as it was group effort to make sure it was the right way and everything was joined correctly. We then decided it was too long and mad it into squares to just attach to some of the bridge.

We joint this using tape.



I don't have a video for the car going over our bridge but it went over good with a few implications. One of the implications was the amount of tape on the bamboo as it was not smooth enough for the remote car to drive. Also I had to help keep it from driving off of the bridge as not all of it had walls to protect the car.

Overall, I enjoyed this pathway as it helped broaden the way I came up with ideas. It helped me when I got stuck with ideas and to find inspiration from the smaller things such as everyday objects or food. In terms of sketchbook work there is a huge stark contrast between any pathway I did. The way we were asked to lay out ideas was rough and did not mean that it had to be neat.

No comments:

Post a Comment